Apply Changes option Greyed Out

Support for our DiffMerge utility.

Moderator: SourceGear

Post Reply
sonnys
Posts: 9
Joined: Fri Jun 21, 2013 10:03 am

Apply Changes option Greyed Out

Post by sonnys » Wed Mar 11, 2015 2:57 pm

Hi There,

I must be doing something completely wrong cause I have yet been able to get DiffMerge to work the way I would think it should.

I've done a compare between a branched file and the main truck file. Found a number of differences that I need to pull down. When I have the 2 files side by side, I have no option to merge the changes from left to right.

Any help would be great.

Thansk

SS

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: Apply Changes option Greyed Out

Post by Beth » Wed Mar 11, 2015 3:55 pm

Are you initiating the compare from two files on disk, or from inside Vault, or from inside some other source control product?
Beth Kieler
SourceGear Technical Support

sonnys
Posts: 9
Joined: Fri Jun 21, 2013 10:03 am

Re: Apply Changes option Greyed Out

Post by sonnys » Thu Mar 12, 2015 12:53 pm

Comparing from inside Vault.

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: Apply Changes option Greyed Out

Post by Beth » Thu Mar 12, 2015 2:03 pm

Go to Vault - Tools - Options. Click on the link for Diff/Merge settings. In the line for configuring differences, remove either /ro1 or /ro2 or both. Those set the read-only settings on each pane.
Beth Kieler
SourceGear Technical Support

sonnys
Posts: 9
Joined: Fri Jun 21, 2013 10:03 am

Re: Apply Changes option Greyed Out

Post by sonnys » Thu Mar 12, 2015 3:50 pm

PERFECT!! thank you

Post Reply