Standard vs Professional

If you are having a problem using Vault, post a message here.

Moderator: SourceGear

Post Reply
jcmercure
Posts: 8
Joined: Wed Sep 03, 2014 11:41 am

Standard vs Professional

Post by jcmercure » Wed Sep 03, 2014 11:50 am

Hello -

We just recently purchased Vault 7.1 and need to plan the upgrade. In looking at your site, you recommend we download and install past versions to incrementally upgrade. Our current version is 5.0.1.18729.

I have a couple of questions.

1 - How do I know if we have Standard vs Professional to know which downloads to use?

2 - On average how long does it take to apply each incremental upgrade? I need to determine the best time to do the upgrade but have no idea how long it should take.

Thanks.

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: Standard vs Professional

Post by Beth » Wed Sep 03, 2014 4:08 pm

1 - How do I know if we have Standard vs Professional to know which downloads to use?

Go to http://<your Vault server>/vaultservice/index.html and that page will tell you exactly what you have.

2 - On average how long does it take to apply each incremental upgrade? I need to determine the best time to do the upgrade but have no idea how long it should take.

The time depends on too many factors to estimate well. A "best guess" that I use is the same time as the backup of the database.
Beth Kieler
SourceGear Technical Support

jcmercure
Posts: 8
Joined: Wed Sep 03, 2014 11:41 am

Re: Standard vs Professional

Post by jcmercure » Thu Sep 04, 2014 7:02 am

I checked this page, http://<your Vault server>/vaultservice/index.html, as suggested and it says nothing about Standard or Professional on it. I assume this means we have Standard.

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: Standard vs Professional

Post by Beth » Thu Sep 04, 2014 8:42 am

If it doesn't say Professional, then you have Standard.
Beth Kieler
SourceGear Technical Support

jcmercure
Posts: 8
Joined: Wed Sep 03, 2014 11:41 am

Re: Standard vs Professional

Post by jcmercure » Thu Sep 04, 2014 9:26 am

Thanks

jcmercure
Posts: 8
Joined: Wed Sep 03, 2014 11:41 am

Re: Standard vs Professional

Post by jcmercure » Thu Sep 04, 2014 9:38 am

One more question.

In looking at the license key document, we apparently purchased 7.1 Professional, 3 upgrade licenses and 1 new license.

What issues will we have upgrading from 5.01 Vault Standard to 7.1 Professional and what path do we have to take?

If it matters the licenses were purchased from Component Source.

Thanks.

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: Standard vs Professional

Post by Beth » Thu Sep 04, 2014 9:48 am

We have an Upgrading Guide that will take you through all the details to consider and what to do.

Let me know if you have any questions about the information in that guide.
Beth Kieler
SourceGear Technical Support

jcmercure
Posts: 8
Joined: Wed Sep 03, 2014 11:41 am

Re: Standard vs Professional

Post by jcmercure » Thu Sep 04, 2014 10:30 am

Thanks, again.

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: Standard vs Professional

Post by Beth » Thu Sep 04, 2014 10:45 am

You're welcome.
Beth Kieler
SourceGear Technical Support

jcmercure
Posts: 8
Joined: Wed Sep 03, 2014 11:41 am

Re: Standard vs Professional

Post by jcmercure » Mon Sep 08, 2014 10:01 am

I am sorry, I have yet one more question related to our upgrade plans.

Our current Vault Server is Server 2003 R2. .NET 4.5 is not supported on this server based on Microsoft's site.

In order to upgrade to 7.1 does the server absolutely have be at framework 4.5 and IIS 7?

We have a new server to be setup that will meet all of the technical requirements but it won't be available until mid to late October at the earliest.

We recently upgraded our dev tools to VS 2013 and found that access to the 'advanced' Vault 5.x client is not available. I hate to think we have to limp through until we get the new server in place.

Can we update the Vault db to 7.x and our local clients but then deal with the server side UI after migrating to the new server?

If not, is there a way to access to the 'advanced' 5.x client in VS 2013?

Thanks.

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: Standard vs Professional

Post by Beth » Mon Sep 08, 2014 10:27 am

In order to upgrade to 7.1 does the server absolutely have be at framework 4.5 and IIS 7?

Yes. You will want to check our Compatibility Chart that lists what is supported with each version.

To stay with Windows 2003 server until the new machine is ready, you could upgrade to Vault 6.1.0, but that won't get you support for VS 2013.

If you upgraded to VS 2013, did you reinstall your Vault client? There are registry keys that need to be set for the integration. I'm not sure it would work, because we didn't test Vault 5.x with VS 2013, but if you wanted to try it anyway, that's the place to start.
Beth Kieler
SourceGear Technical Support

jcmercure
Posts: 8
Joined: Wed Sep 03, 2014 11:41 am

Re: Standard vs Professional

Post by jcmercure » Mon Sep 08, 2014 10:41 am

Okay, thanks again.

Post Reply