About DiffMerge Tool encodings-simple Chinese

If you are having a problem using SourceOffSite, post a message here.

Moderator: SourceGear


Posts: 6
Joined: Mon Apr 17, 2006 3:15 am
PostPosted: Mon Apr 17, 2006 3:19 am
I use simple Chinese language files.
But I can't set GBK or GB2312 character encodings in the DiffMerge Tool.
so I need GB2312.SO or GBK.SO.
where can I find it? thanks a lot!

Posts: 9736
Joined: Tue Dec 16, 2003 1:25 pm
Location: SourceGear
PostPosted: Mon Apr 17, 2006 9:58 am
Here's a copy of the file to use with SGDM.exe:
Attachments
gb2312.so.zip
(37.85 KiB) Downloaded 813 times
Linda Bauer
SourceGear
Technical Support Manager

Posts: 6
Joined: Mon Apr 17, 2006 3:15 am
PostPosted: Mon Apr 17, 2006 7:17 pm
Hi!
Thank you for your help.
But the system shows - "could not load character encoding module 'GB2312' ".
I have copied the gb2312.so to the path "/iconv/" and added the "gb2312" to the option->encoding.
PLZ help me!

If I want to use Japanese which encoding file I should get?

Thanks!

Posts: 9736
Joined: Tue Dec 16, 2003 1:25 pm
Location: SourceGear
PostPosted: Tue Apr 18, 2006 2:21 pm
What version of SOS are you using? This .so file only works with SOS 4.x and the sgdm.exe that ships with that client. Look in Help->About SOS for the SOS client version and if you do have the sgdm.exe, launch that and look in Help->About for the version of the SourceGear Diff/Merge, SGDM.exe.
Linda Bauer
SourceGear
Technical Support Manager

Posts: 6
Joined: Mon Apr 17, 2006 3:15 am
PostPosted: Tue Apr 18, 2006 9:40 pm
The sourceoffsite client is 4.1.2;
the version of the SourceGear Diff/Merge is 1.1.0
Thanks!

Posts: 9736
Joined: Tue Dec 16, 2003 1:25 pm
Location: SourceGear
PostPosted: Wed Apr 19, 2006 6:22 am
But the system shows - "could not load character encoding module 'GB2312' ".


At what point did you get this error message?
Linda Bauer
SourceGear
Technical Support Manager

Posts: 9736
Joined: Tue Dec 16, 2003 1:25 pm
Location: SourceGear
PostPosted: Wed Apr 19, 2006 2:52 pm
Just to make sure, is the build number for Diff/Merge 188, or a different build?
Linda Bauer
SourceGear
Technical Support Manager

Posts: 6
Joined: Mon Apr 17, 2006 3:15 am
PostPosted: Thu Apr 20, 2006 11:59 pm
build number for Diff/Merge is 185.

1.1.0(185)

Posts: 6
Joined: Mon Apr 17, 2006 3:15 am
PostPosted: Fri Apr 21, 2006 7:41 pm
I find the SOS client's version and build version.

It's 4.1.2.185

I also need a Japanese .SO file.

Thanks!

Posts: 6
Joined: Mon Apr 17, 2006 3:15 am
PostPosted: Tue Apr 25, 2006 8:26 pm
I want to know when I can get the .so files for GB2312 and Japanese.
Thank you very much .

Posts: 9736
Joined: Tue Dec 16, 2003 1:25 pm
Location: SourceGear
PostPosted: Thu May 04, 2006 4:19 pm
Based on experience we had in the Vault forum, it looks like you need two .so files. See this thread:

http://support.sourcegear.com/viewtopic.php?t=5969

GB2312.so actually depends on another encoding called gb_2312-80.so. So, you need to install the gb_2312-80.so file into the same inconv folder, and then gb2312 should load. It is in the attached file.
Attachments
gb_2312-80_308.zip
(70.03 KiB) Downloaded 779 times
Linda Bauer
SourceGear
Technical Support Manager

Return to Support (SourceOffSite)

Who is online

Users browsing this forum: No registered users and 8 guests

cron