Enabling Source Control Functions in Visual Basic 6

A collection of information about Vault, including solutions to common problems.

Moderator: SourceGear

Post Reply
Posts: 9736
Joined: Tue Dec 16, 2003 1:25 pm
Location: SourceGear

Enabling Source Control Functions in Visual Basic 6

Post by lbauer » Thu Oct 21, 2004 8:16 am

You may have to do some additional configuration to enable Vault integration with Visual Basic 6.

First, verify that Vault is your default Source Code Control Provider. This setting is in the Vault Client under Tools->Options->General.

Next, in the VB menu select Add-ins->Add-in Manager.

From the list of available Add-ins, highlight "Source Code Control" and make sure "Load on Startup" and "Loaded/Unloaded" are checked in Load Behavior.

Additionally, you may want to check your vbaddin.ini file.
There should be an entry for source code control integration. If not
add the following entry:


Additional details in this Microsoft KB article:

On Vista, Windows 7, or with later versions of Vault, you may need to also add runtime information in a config file. Use the instructions posted here: http://support.sourcegear.com/viewtopic ... 13&t=15034.
Linda Bauer
Technical Support Manager

Post Reply