IIS defalt web service will not start

If you are having a problem using Fortress, post a message here.

Moderator: SourceGear

Post Reply
soliphant@azdor.gov
Posts: 7
Joined: Tue Nov 20, 2007 1:35 pm

IIS defalt web service will not start

Post by soliphant@azdor.gov » Tue Nov 20, 2007 1:39 pm

I have installed Fortress on a machine with 1 GB of RAM. Will this situation generate the message:

Event Type:
Error
Event Source:
Service Control Manager
Event Category:
None
Event ID:
7023
Date:

11/20/2007
Time:

10:38:11 AM
User:

N/A
Computer:
PHX88090
Description:
The World Wide Web Publishing service terminated with the following error:
The specified procedure could not be found.
Steve

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Post by Beth » Tue Nov 20, 2007 2:12 pm

I hadn't heard of that. I would suspect a permissions issue.

Just for a test, you could open up your permissions to the disk to everyone and have it inheirited and see if IIS would start then. Of course, only do that one if you don't have anything important there yet, and don't leave it open like that. It's just to see if IIS would start then.

soliphant@azdor.gov
Posts: 7
Joined: Tue Nov 20, 2007 1:35 pm

giving access to the disk to everyone didn't work.

Post by soliphant@azdor.gov » Wed Nov 21, 2007 9:58 am

Beth,

I gave that a try and it still won't start. I am going to try another re-install of Fortress. It seems like the .net stuff is in the right place and I ran the utility to ensure that the .net links were set up properly.

Maybe a re-install will help. Worth a try in any case. It says it can't find a procedure. I am trying to find where the name of the procedure is as well.
Steve

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Post by Beth » Wed Nov 21, 2007 10:05 am

Was the .NET framework installed after IIS? It needs to go in that order of IIS and then .NET for some things to work.

What are the frameworks you have installed/.

soliphant@azdor.gov
Posts: 7
Joined: Tue Nov 20, 2007 1:35 pm

Post by soliphant@azdor.gov » Wed Nov 21, 2007 10:47 am

I have both v1.1.4322 and v2.0.50727.

I am not sure anymore about the order. I just uninstalled Fortress and the IIS defalt web site still wont' start. I think I will take this all back to ground zero. De-install .Net and de-install IIS.

Then Install IIS.

Install .net 2

Install Fortress

Then see what happens.
Steve

soliphant@azdor.gov
Posts: 7
Joined: Tue Nov 20, 2007 1:35 pm

Post by soliphant@azdor.gov » Wed Nov 21, 2007 11:50 am

After dong the re-install of everything and in the correct order. Fortress came up and is running properly now.

Thanks for your help.
Steve

soliphant@azdor.gov
Posts: 7
Joined: Tue Nov 20, 2007 1:35 pm

Post by soliphant@azdor.gov » Wed Nov 21, 2007 12:17 pm

Well, I am back to IIS default web site is not starting. The system applied two patches to .net 2.0. They are KB917283 and KB922770.

I will back those off and see if IIS will then start.

Is anyone aware of a problem for Fortress and these two patches?
Steve

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Post by Beth » Wed Nov 21, 2007 2:33 pm

I applied those two patches to one of my test servers with Fortress on it and didn't have a problem. If those are the most recent change though, they could be reacting with something else then possibly? I'll let my server install all updates and see if it has issues then.

soliphant@azdor.gov
Posts: 7
Joined: Tue Nov 20, 2007 1:35 pm

Post by soliphant@azdor.gov » Wed Nov 21, 2007 4:37 pm

Well. I have uninstalled and re-installed everything and am now down to the following error message when it tries to first open a browser page:

Server Error in '/VaultService' Application.
--------------------------------------------------------------------------------

Failed to access IIS metabase.

The process account used to run ASP.NET must have read access to the IIS metabase (e.g. IIS://servername/W3SVC). For information on modifying metabase permissions, please see http://support.microsoft.com/?kbid=267904.

I tried adding in IDs using the information contained in the MS article references above.

When I install Fortress I use the machine login phx88090\aspnet. If I add aspnet read access, then I get a logon prompt when trying to access the page.

IIS kept on running though. I just can't get into Fortress.
Steve

lbauer
Posts: 9736
Joined: Tue Dec 16, 2003 1:25 pm
Location: SourceGear

Post by lbauer » Wed Nov 21, 2007 6:37 pm

See if the suggestion in this forum post helps:

http://support.sourcegear.com/viewtopic.php?t=8348
Linda Bauer
SourceGear
Technical Support Manager

soliphant@azdor.gov
Posts: 7
Joined: Tue Nov 20, 2007 1:35 pm

Post by soliphant@azdor.gov » Fri Nov 23, 2007 3:47 pm

Well, I uninstalled everything, then re-installed everything. Then rebooted and then did what your link said to do. All appears well at this point.

Thanks for your help.
Steve

Post Reply