Bug

Support for our DiffMerge utility.

Moderator: SourceGear

Post Reply
marcosj
Posts: 2
Joined: Thu Jan 21, 2010 10:34 am

Bug

Post by marcosj » Thu Jan 21, 2010 10:46 am

I have two files in which DiffMerge don't show any differences but there are two lines different: 561 and 630.
I attach the files.

Thanks
Marcos
Attachments
Copia de PGenDocum.txt
(43.14 KiB) Downloaded 428 times
PGenDocum.txt
(43.14 KiB) Downloaded 417 times

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: Bug

Post by Beth » Fri Jan 22, 2010 10:00 am

Which version of the DiffMerge are you using? I ran it though a quick diff on my machine and it does show the differences.

On the far left side of the window, do you see two red lines?
Diff1.JPG
Diff1.JPG (7.44 KiB) Viewed 4930 times
Is line 561 highlighted? If so, look on the right side of that line. Does it match what I have here?
Diff2.JPG
Diff2.JPG (4.76 KiB) Viewed 4930 times
Beth Kieler
SourceGear Technical Support

marcosj
Posts: 2
Joined: Thu Jan 21, 2010 10:34 am

Re: Bug

Post by marcosj » Fri Jan 22, 2010 11:14 am

The version of DiffMerge is 3.3.0.
Really de extension of this files is .prg not .txt (I couldn't upload prg files) and when I compare the files with prg extension DiffMerge don't show any differences.
The problem was that I defined rulesets for prg files. When I deleted this rulesets DiffMerge showed the differences.

Thanks for your reply.
Marcos

Beth
Posts: 8550
Joined: Wed Jun 21, 2006 8:24 pm
Location: SourceGear
Contact:

Re: Bug

Post by Beth » Wed Jan 27, 2010 5:24 pm

Thanks for the update.
Beth Kieler
SourceGear Technical Support

Post Reply